April 2026
Subscribe to our Regulatory Updates
Unsubscribe at any time. Read our privacy policy.
North America News
On 9 April 2026, the U.S. Environmental Protection Agency finalized a change to the start of the reporting period under the TSCA section 8(a)(7) PFAS reporting rule. The reporting start date has been moved from 13 April 2026, to 60 days following the effective date of EPA's forthcoming revision to the PFAS 8(a)(7) rule. This delay provides the EPA with additional time to review thousands of public comments submitted in response to the November 2025 proposed updates, with a final revised rule expected later in 2026.
On 9 April 2026, the United States Environmental Protection Agency (EPA) announced the finalization of a revised start date for the Toxic Substances Control Act (TSCA) section 8(a)(7) per- and polyfluoroalkyl substances (PFAS) reporting period. The original start date of 13 April 2026 has been postponed. Reporting will now commence 60 days after the effective date of EPA's forthcoming revision to the PFAS 8(a)(7) rule.
Background: TSCA section 8(a)(7) requires any person that has manufactured (including imported) PFAS in any year between 2011 and 2022 to report the following information to the EPA: chemical identity; uses; volumes manufactured and processed; byproducts; environmental and health effects; worker exposure; and disposal methods.
Reason for Delay: EPA is currently reviewing thousands of public comments received regarding the November 2025 proposed updates to the PFAS 8(a)(7) rule. The delay is intended to allow the agency to refine the rule to deliver clearer, more actionable reporting guidance, and to close potential loopholes that could delay health-protective decisions.
Next Steps: EPA plans to issue a final revised rule later in 2026. The EPA's guidance and reporting tool will be made available to help ensure collected data are complete, accessible, and useful to regulators, communities, and researchers.
On 1 April 2026, the U.S. Consumer Product Safety Commission staff published within the Federal Register a Direct Final Rule for 16 CFR Part 1239, Safety Standard for Gates and Enclosures. 16 CFR Part 1239 will now reference ASTM F1004-25, Standard Consumer Safety Performance Specification for Expansion Gates and Expandable Enclosures as mandatory with no modifications.
The U.S. Consumer Product Safety Commission (CPSC) published a Direct Final Rule (DFR) for 16 CFR Part 1239, Safety Standard for Gates and Enclosure. This follows the Consumer Product Safety Improvement Act (CPSIA) process for updating standards for durable infant or toddler products that are based on a voluntary standard. The DFR will reference ASTM F1004-25, Standard Consumer Safety Performance Specification for Expansion Gates and Expandable Enclosures as mandatory with no modifications. The DFR was published on 1 April 2026.
The previous version of 16 CFR 1239 referenced ASTM F1004-22 as mandatory with no modifications. The F1004-25 version added a requirement that will not allow for any pet entry or egress openings within the gate/enclosure. This ban addresses safety related issues with these openings which can create head-entrapment hazards, allow footholds that can result in climbing and falls and provide the ability for children to break free from the area of confinement. The 2025 version also contains other editorial changes.
This Direct Final Rule will become effective 19 July 2026, unless the CPSC receives any significant or adverse comments by 1 May 2026. Manufacturers and distributors should review their product lines accordingly for compliance with these new requirements.
In the US, when hazards are identified in consumer products, they will be recalled and published in the Consumer Product Safety Commission (CPSC) Recent Recalls on the CPSC website, which is updated daily. The US recalls from 01 March 2026 to 31 March 2026 are summarized below:
|
Hazards |
Frequency |
|---|---|
|
Risk of Death |
20 |
|
Injury Hazard |
14 |
|
Ingestion Hazard |
6 |
|
Fall Hazard |
6 |
|
Entrapment Hazard |
5 |
|
Burn Hazard |
4 |
|
Fire Hazard |
4 |
|
Chemical Hazard |
3 |
|
Tip-Over Hazard |
3 |
|
Swallowing Risk |
3 |
|
Other Hazards* |
7 |
*Other Hazards include Crash Hazard, Choking Hazard, Suffocation Hazard and Laceration Hazard with a frequency of less than 3.
|
Product Categories |
Frequency |
|---|---|
|
Toys and Childcare Products |
6 |
|
Furniture |
5 |
|
Home Electrical Appliances |
3 |
|
Electrical Appliances |
2 |
|
Protective Equipment |
2 |
|
Tools and Hardware |
2 |
|
Food Contact Material |
2 |
|
Fabric / Textile / Garment / Home Textile |
2 |
|
Sporting Goods / Equipment |
2 |
|
Outdoor Living Items |
1 |
|
Bodycare / Cosmetics |
1 |
|
Household Items |
1 |
For a complete list, click here
In Canada, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Health Canada website, which is updated daily. The Canada recalls from 01 March 2026 to 31 March 2026 are summarized below:
|
Hazards |
Frequency |
|---|---|
|
Ingestion Hazard |
6 |
|
Chemical Hazard |
6 |
|
Burn Hazard |
3 |
|
Fire Hazard |
3 |
|
Choking Hazard |
2 |
|
Strangulation Hazard |
1 |
|
Injury Hazard |
1 |
|
Fall Hazard |
1 |
|
Entrapment Hazard |
1 |
|
Product Categories |
Frequency |
|---|---|
|
Toys and Childcare Products |
8 |
|
Bodycare / Cosmetics |
4 |
|
Home Electrical Appliances |
3 |
|
Household Items |
2 |
|
Chemicals |
2 |
|
Food Contact Material |
1 |
|
Electrical Appliances |
1 |
|
Sporting Goods / Equipment |
1 |
|
Stationery |
1 |
For a complete list, click here
Europe News
On 30 March 2026, the European Commission published a draft guidance document and a Frequently Asked Questions (FAQ) listing for Regulation (EU) 2025/40 on packaging and packaging waste . These documents provide critical interpretative details for the restriction on PFAS in food contact packaging.
Regulation (EU) 2025/40 on packaging and packaging waste (PPWR), published in the Official Journal of the European Union on 22 January 2025, will take effect on 12 August 2026. On 30 March 2026, a newly created draft guidance document and a Frequently Asked Questions (FAQ) listing corresponding to this regulation were published to provide the following key clarifications:
1. Scope of Application:
The restriction applies to the entire packaging unit, including all components such as inks, varnishes, glues, and adhesives.
2. Intentional vs. Unintentional:
The limit applies to all perfluoroalkyl and polyfluoroalkyl substances (PFAS) present, making no distinction between intentionally added substances and those unintentionally present (e.g., from recycled materials or contamination).
3. Market Placement Rules:
All food contact packaging placed on the market on or after 12 August 2026, must comply with the PFAS restriction.
Packaging placed on the market before 12 August 2026 may continue to be sold without recall. There is no stock depletion transition period for non-compliant inventory produced before that date.
Packaging containing recycled materials is also subject to the restriction.
4. Recommended Testing Scheme:
Due to the absence of a unified European Union (EU) method, a three-step testing approach is recommended to demonstrate compliance:
Step 1 (Total Fluorine Test): If total fluorine is < 50 mg/kg, the sample is considered compliant.
Step 2 (Organic Fluorine Test): If total fluorine is ≥ 50 mg/kg, an organic fluorine test (e.g., by GC/MS) is performed. If organic fluorine is < 50 mg/kg, the sample is considered compliant.
Step 3 (Targeted Analysis): If steps 1 and 2 indicate potential PFAS presence, targeted analysis (e.g., Precursor) is used to check compliance with the specific concentration limits of 25 μg/kg (ppb) for any individual PFAS and 250 μg/kg (ppb) for the sum of PFAS.
5. Future Review:
The Commission will evaluate whether this PPWR restriction needs amendment or repeal if it overlaps with restrictions under other EU laws like the Food Contact Materials Regulation, registration, evaluation, authorization and restriction of chemicals (REACH), or the persistent organic pollutants (POPs) Regulation.
Impact & Recommendations:
This guidance is critical for all economic operators supplying food contact packaging to the EU. With the compliance deadline approaching, businesses are advised to:
- Conduct a comprehensive formula screening of all packaging components to avoid using PFAS.
- Use total fluorine < 50 mg/kg as a safety threshold for initial compliance verification.
- Perform deep supply chain traceability, with particular focus on high-risk areas such as recycled materials and oil-resistant coatings, to secure compliance documentation from suppliers.
In Europe, when hazards are identified in non-food consumer products, the products will be recalled and published in the Safety Gate system, which is updated weekly. The European recalls from 01 March 2026 to 31 March 2026 are summarized below:
|
Hazards |
Frequency |
|---|---|
|
Chemical Hazard |
77 |
|
Choking Hazard |
47 |
|
Electric Shock Hazard |
38 |
|
Injury Hazard |
33 |
|
Fire Hazard |
33 |
|
Burn Hazard |
29 |
|
Suffocation Hazard |
9 |
|
Health Risk Hazard |
7 |
|
Strangulation Hazard |
7 |
|
Other Hazards* |
22 |
*Other Hazards include Damage to Hearing, Damage to Sight, Cut Hazard, Environmental Hazard, Entrapment Hazard, Microbiological Hazard, Drowning Hazard and Safety Risk Hazard with a frequency of less than 7.
|
Product Categories |
Frequency |
|---|---|
|
Toys and Childcare Products |
73 |
|
Electrical Appliances |
39 |
|
Bodycare / Cosmetics |
34 |
|
Home Electrical Appliances |
24 |
|
Jewelry |
11 |
|
Outdoor Living Items |
10 |
|
Fabric / Textile / Garment / Home Textile |
8 |
|
Sporting Goods / Equipment |
7 |
|
Chemicals |
6 |
|
Tools and Hardware |
6 |
|
Other Categories* |
29 |
*Other Categories include Pet Items, Accessories, Food Contact Material, Machinery, Computer / Audio / Video / Other Electronics & Accessories, Stationery, Protective Equipment, Household Items and Footwear with a frequency of less than 6.
|
Notifying Country |
Frequency |
|---|---|
|
United Kingdom in respect of Northern Ireland |
49 |
|
France |
42 |
|
Germany |
28 |
|
Hungary |
24 |
|
Czechia |
20 |
|
Norway |
11 |
|
The Netherlands |
11 |
|
Poland |
9 |
|
Austria |
8 |
|
Italy |
7 |
|
Estonia |
6 |
|
Other Countries* |
32 |
*Other Countries include Spain, Ireland, Finland, Lithuania, Luxembourg, Slovakia, Cyprus, Belgium, Sweden, Slovenia, Croatia and Bulgaria with a frequency of less than 6.
For a complete list, click here
Asia News
On 13 March 2026, the Hong Kong Government published in the Gazette the Toys and Children's Products Safety Ordinance (Amendment of Schedules 1 and 2) Notice 2026. The Notice seeks to update the safety standards for toys and four classes of children's products listed in Schedule 2 (Schedule 2 products) under the Toys and Children's Products Safety Ordinance (Cap. 424)
The Hong Kong Government issued amendment notice 2026 to the Toys and Children’s Products Safety Ordinance (Cap. 424) (Schedules 1 and 2) on 13 March 2026, which was published in the Gazette. The last updates to Schedules 1 and 2 were implemented in August 2025.
The Ordinance stipulates that a person must not manufacture, import or supply a toy or an associated Schedule 2 product unless it complies with all the applicable requirements contained in any one of the safety standards (international standards or standards adopted by major economies) specified in Schedule 1 or Schedule 2.
Schedule 1 is applicable to toys.
Schedule 2 products include the following four classes:
children's high chairs and multipurpose high chairs for domestic use
children's paints
playpens for domestic use
wheeled child conveyances
The Notice will take effect on 1 August 2026.
Amendments are as follows:
(A) Schedule 1 amended (toy standards)
(1) Schedule 1, item 2(c)—
Repeal “BS EN 71-3:2019 + A1:2021”, Substitute “BS EN 71-3:2019 + A2:2024”.
(2) Schedule 1, item 2(d)—
Repeal “BS EN 71-4:2020”, Substitute “BS EN 71-4:2020 + A1:2025”.
(3) Schedule 1, item 2(hab)—
Repeal “BS EN 71-13:2021 + A1:2022”, Substitute “BS EN 71-13:2021 + A2:2024”.
(B) Schedule 2 amended (Schedule 2 product standards)
(1) Schedule 2, item 8, column 2—
Repeal “BS EN 14988:2017 + A1:2020” , Substitute “BS EN 14988:2017 + A2:2024”.
(2) Schedule 2, item 8, column 2—
Repeal “(a) ISO 9221-1:2015 “Furniture—Children’s high chairs—Part 1: Safety requirements”, and (b) ISO 9221-2:2015 “Furniture—Children’s high chairs—Part 2: Test methods””, Substitute “ISO 9221:2024“Furniture—Children’s high chairs—Safety requirements and test methods””.
(3) Schedule 2, item 9, column 2—
Repeal “BS EN 71-3:2019 + A1:2021”, Substitute “BS EN 71-3:2019 + A2:2024”.
(4) Schedule 2, item 11, column 2—
Repeal “ASTM F406-22” Substitute “ASTM F406-24”.
(5) Schedule 2, item 12, column 2—
Repeal “AS 2088:2022” Substitute “AS 2088:2022 (incorporating Amendment 1:2024)”.
In China, when hazards are identified in consumer products, they will be recalled and published in the SAMR Defective Product Administrative Centre, which is updated daily. The China recalls from 01 March 2026 to 31 March 2026 are summarized below:
|
Hazards |
Frequency |
|---|---|
|
Safety Risk Hazard |
14 |
|
Electric Shock Hazard |
11 |
|
Chemical Hazard |
11 |
|
Fire Hazard |
11 |
|
Injury Hazard |
9 |
|
Crash Hazard |
4 |
|
Choking Hazard |
3 |
|
Suffocation Hazard |
3 |
|
Fall Hazard |
2 |
|
Entrapment Hazard |
2 |
|
Other Hazards* |
7 |
*Other Hazards include Laceration Hazard, Skin Irritation Risk, Burn Hazard, Ingestion Hazard, Strangulation Hazard, Impact Hazard, Explosion Hazard with a frequency of less than 2.
|
Product Categories |
Frequency |
|---|---|
|
Stationery |
6 |
|
Toys and Childcare Products |
6 |
|
Home Electrical Appliances |
6 |
|
Sporting Goods / Equipment |
5 |
|
Accessories |
5 |
|
Protective Equipment |
4 |
|
Fabric / Textile / Garment / Home Textile |
3 |
|
Food Contact Material |
3 |
|
Footwear |
2 |
|
Jewelry |
1 |
|
Furniture |
1 |
|
Provinces |
Frequency |
|---|---|
|
Anhui |
11 |
|
Guangdong |
9 |
|
Hunan |
5 |
|
Shanghai |
4 |
|
Tianjin |
3 |
|
Henan |
3 |
|
Fujian |
2 |
|
Jiangsu |
2 |
|
Chongqing |
1 |
|
Hebei |
1 |
|
Sichuan |
1 |
For a complete list, click here
Australia/New Zealand News
In Australia, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Australian Competition & Consumer Commission website, which is updated daily. The Australia recalls from 01 March 2026 to 31 March 2026 are summarized below:
|
Hazards |
Frequency |
|---|---|
|
Risk of Death |
14 |
|
Injury Hazard |
13 |
|
Burn Hazard |
9 |
|
Choking Hazard |
5 |
|
Fire Hazard |
5 |
|
Electric Shock Hazard |
3 |
|
Ingestion Hazard |
2 |
|
Lead Poisoning Hazard |
1 |
|
Health Risk Hazard |
1 |
|
Fall Hazard |
1 |
|
Product Categories |
Frequency |
|---|---|
|
Toys and Childcare Products |
6 |
|
Sporting Goods / Equipment |
4 |
|
Home Electrical Appliances |
3 |
|
Electrical Appliances |
3 |
|
Computer / Audio / Video / Other Electronics & Accessories |
1 |
|
Furniture |
1 |
|
Fabric / Textile / Garment / Home Textile |
1 |
|
Tools and Hardware |
1 |
|
Food Contact Material |
1 |
For a complete list, click here