April 2019

On February 21, 2019, the U.S. Food and Drug Administration (FDA) announced a proposed rule to update the regulatory requirements for sunscreen products in the US.

With the aim to ensure that consumers can access safe and effective preventative sun care products from nonprescription, over-the-counter (OTC) channels, the FDA proposed to amend the regulatory requirements for sunscreen products using current scientific evidence and compliance with the Sunscreen Innovation Act (SIA). A summary of the proposed key updates is listed below:

• Updated the list of safe sunscreen active ingredients

• Updated the scope of dosage forms that are generally recognized as safe and effective (GRASE)

• Proposed to raise the maximum SPF value on sunscreen labels from SPF 50+ to SPF 60+

• Established broad-spectrum requirements for sunscreens with an SPF value of 15 or higher

• Proposed new labeling requirement to help consumers identify key product information easily

• Proposed that combination sunscreen with insect repellent products are not GRASE

The proposed amendments are under a comment period through May 28, 2019.

On February 6, 2019, the U.S. Federal Trade Commission (FTC) published a notice to seek public comments on whether to repeal, amend or retain the Guides for Select Leather and Imitation Leather Products (Leather Guides) in 16 CFR 24.

The Leather Guides, issued by the FTC in 1996, widely apply to the manufacture, promotion, and distribution of leather and imitation leather products including luggage, wallets and footwear. They provide instructions for the labeling of leather and imitation leather products. In addition, they address misrepresentations about the composition and characteristics of specific leather and imitation leather products and require marketers to deliver truthful, non-misleading information to consumers when selling imitation leather products.

The FTC seeks public comment on the continuing need for the Leather Guides through April 22, 2019.

On March 20, 2019, the U.S. Environmental Protection Agency (EPA) published a notice to conduct a prioritization process for 40 selected chemicals under the amended Toxic Substances Control Act (TSCA).

According to TSCA, the EPA is required to review chemicals currently in commerce on a regular basis. Among all 40 chemicals, 20 chemicals are classified as “High Priority Substances”, which required a subsequent three-year risk evaluation process to determine whether the chemicals pose hazards to human health and the environment. Twenty chemicals are classified as “Low Priority Substances” for risk evaluation.

A full list of the 40 chemicals included in the prioritization process can be found in the link below: https://www.epa.gov/assessing-and-managing-chemicals-under-tsca/list-chemicals-undergoing-prioritization

On January 21, 2019, the State of New York proposed the Consumer Right to Know Act in the latest Executive Budget in order to protect the public from unknown exposure to toxic chemicals.

In the proposal, a list of more than 1,000 carcinogens and other potential hazardous chemicals will be developed by the Department of Environmental Conservation (DEC), in consultation with the Department of Health and the Department of State. An on-package labelling requirement will be established to indicate the presence of the listed chemicals in consumer products.

Official legislative text has not yet been published. The government will work on measures to provide more information to consumers.

In February, 2019, the California Department of Toxic Substances Control (DTSC) proposed to list toluene-containing nail products as a Priority Product with a Chemical of Concern under the Safer Consumer Products (SCP) Regulation.

Toluene is a volatile solvent and commonly used in the manufacturing of nail products. Due to its high volatility at room temperature, toluene is readily released from products into the air causing inhalation, dermal and oral exposure. It has been found that exposure to toluene may pose adverse health effects in the nervous system and respiratory tract, as well as potentially cause developmental toxicity.

Upon approval, manufacturers of nail products containing toluene will be required to notify the DTSC within 60 days.

On February 5, 2019, the Office of Administrative Law (OAL) approved proposed amendments issued by the Office of Environmental Health Hazard Assessment (OEHHA) regarding the addition of No Significant Risk Levels (NSRLs) for the chemicals, Bromochloroacetic Acid and Bromodichloroacetic Acid in Title 27, California Code of Regulations, section 25705.

Bromochloroacetic Acid and Bromodichloroacetic Acid are carcinogens that are listed on the Proposition 65 Chemical list. For determining the safe harbor level of carcinogens in the environment, NSRLs are developed by the OEHHA. Daily exposure to carcinogens below corresponding NSRLs is considered to pose no significant risk to human health and therefore no Proposition 65 warning label is required.

According to the Final Statement of Reasons (Bromochloroacetic Acid and Bromodichloroacetic Acid), the following NSRLs came into force on April 1, 2019.

In March 2019, the California Office of Environmental Health Hazard Assessment (OEHHA) added a new chemical to the Proposition 65 List. The new chemical is:

• Bevacizumab

The added chemical meets the requirements for listing under Proposition 65 as being known to the State of California to cause developmental toxicity and female reproductive toxicity. The chemical details are provided below:

In February 2019, Health Canada published updated guidelines for the Children’s Sleepwear Regulations (SOR/2016-169).

These guidelines provide information about flammability safety requirements for children’s sleepwear in sizes 0 to 14X, including bathrobes, sleepers and nightgowns that are manufactured, imported, advertised or sold in Canada. The following key updates are included in the new version of the guidelines:

• Updated the definition of children’s sleepwear

• Added interpretation of sizing of children’s and adult’s sleepwear

• Added guidance for sleepwear accessories, including slippers, sleep masks and caps

• Amended sizing for infants age 9 months and interpretation for Infant styling up to 9 months

• Specified the labeling criteria size labelling

• Updated flammability requirements for tight-fitting and loose-fitting children's sleepwear

• Updated the requirements for the use of flame-retardant chemicals in children’s sleepwear

In February 2019, Health Canada issued a notice to amend the Toys Regulations (SOR/2011-17) by adding new flammability and labelling requirements for play tents.

Recently, Health Canada proposed an update to current flammability and labelling requirements in the Tents Regulations to address the flammability risk of tents found in the Canadian market. (test). As a result of those proposed updates, certain play tent requirements shall be incorporated into the Toys Regulations as noted below:

• Amendment of Toy Regulations to include new flammability and fire safety labelling requirements for play tents intended for indoor use only.

• Considering new warning statements "Warning! Keep away from open flame." and "For indoor use only!" to be required on play tents.

• Proposal to prohibit or restrict the use of flame retardants in tents, play tents and possibly other toys subject to flammability requirements.

The comment period for the proposed amendments ended March 23, 2019.

On February 12, 2019, the European Chemical Agency (ECHA) proposed to amend Annex XVII of Regulation (EC) No. 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) through World Trade Organization (WTO) notification.

Upon enforcement, the proposed amendment adds the following substances to Annex XVII of REACH Regulation List of Restriction:

• 1,2-benzenedicarboxylic acid, dihexyl ester, branched and linear;

• Dihexyl phthalate;

• 1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0.3% of dihexyl phthalate;

• Trixylyl phosphate;

• Sodium perborate, perboric acid, sodium salt;

• Sodium peroxometaborate;

• 5-sec-butyl-2-(2,4-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [1], 5-sec-butyl-2-(4,6-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [2] (covering any of the individual stereoisomers of [1] and [2] or any combination thereof) ('karanal group');

• 2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol (UV-328);

• 2,4-di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol (UV-327);

• 2-(2H-benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl)phenol (UV-350);

• 2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320);

• Diazene-1,2-dicarboxamide (C,C'-azodi(formamide)) (ADCA)

On March 13, 2019, the European Union (EU) proposed to amend Annex XIV of Regulation (EC) No. 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).

Upon enforcement, the proposed regulation will amend the Annex XIV List of Authorised Chemicals by adding the following 3 substances of very high concern (SVHC).

• 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid, its salts and its acyl halides (covering any of their individual isomers and combinations thereof)

• 2-methoxy ethyl acetate (EC 203-772-9, CAS 110-49-6).

• Tris(4-nonylphenyl, branched and linear) phosphite (TNPP) with ≥0.1 % w/w of 4-nonylphenol, branched and linear (4-NP)

The proposed amendment is under a comment period through April 29, 2019.

On February 28, 2019, the European Committee for Standardization (CEN) announced new versions of food contact paper and paperboard standards relating to colorfastness, fluorescent fastness and antimicrobial constituents testing. Below is a summary of the new standards for food contact paper and paperboard:

Conflicting national standards will be withdrawn by May 2019.

On January 3, 2019, the Food Safety and Standard Authority of India (FSSAI) published the Food Safety and Standards (Packaging) Regulation, 2018 to replace the Food Safety and Standards (Packaging and Labelling) Regulation 2011. New labelling regulations were published separately.

The new regulations include both general and specific requirements for packaging materials. “Packaging material” in the new regulations is defined as materials such as cardboard, paper, glass, metal, plastic, and multi-layer packaging material used for the packaging of food products. A summary of important provisions of the new regulations follow:

• Prescribes an overall migration limit and specific migration limits for plastic packaging materials.

• Specifies that food packaging materials must comply with India Standards (IS) listed in the Schedules of the new regulations.

• Requires printing inks for use on food packages comply with IS 15495.

• Specifies a list of suggested packaging materials in Schedules for various categories of food product.

• Bans the use of recycled plastic and newspaper as food packaging materials.

• Allows use of relevant international standards where Indian Standards are not available.

• Requires all business operators to obtain a Certificate of Conformity (CoC) issued by laboratories.

The new regulations come into force on July 1, 2019.

In March 2019, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) announced a proposal through World Trade Organization (WTO) notification to update current mandatory inspection requirements for sunglasses and lenses of sunglasses.

As proposed in the amendment notification, inspection standard CNS 15067 will be updated to its 2017 version. Updates to the requirements include aspects of transmittance, spectral transmittance, detection of light signal etc. The Declaration of Conformity and relative conformity assessment procedure remains unchanged.

A summary of covered products and their applicable inspection standards is shown below:

The proposed amendments come into force on March 1, 2020.

Am 14. Februar 2019 veröffentlichte der Commonwealth of Australia eine Änderung der Sicherheitsnorm für Kinderwagen und Buggys, um den Geltungsbereich der Norm auf Buggys auszuweiten.

Gemäß dem Änderungsantrag wurde die folgende Aussage in den Geltungsbereich der Norm für die Sicherheit von Verbraucherprodukten für Kinderwagen und Buggys aufgenommen:

"Kinderwagen umfassen Fahrzeuge auf Rädern, die in mehr als einem Modus betrieben werden können, wenn einer dieser Modi für den Transport eines Kindes in sitzender Position ausgelegt ist (einschließlich, aber nicht beschränkt auf umbaubare Dreiradkinderwagen).

Die Änderung tritt am 14. Februar 2019 in Kraft.

Am 26. Februar 2019 hat Australien/Neuseeland Standards eine Absichtserklärung zur Übernahme der internationalen Norm für Spielzeugsicherheit, ISO 8124-1:2018, Sicherheit von Spielzeug - Teil 1: Sicherheitsaspekte in Bezug auf mechanische und physikalische Eigenschaften, veröffentlicht.

Ziel der Norm ist es, Sicherheitsaspekte im Zusammenhang mit den mechanischen und physikalischen Eigenschaften festzulegen, die allgemein für Spielzeug für Kinder bis zu 14 Jahren gelten, wobei der normale Gebrauch und der vernünftigerweise vorhersehbare Missbrauch berücksichtigt werden. Diese Norm wird mit der ISO 8124-1:2018 identisch sein.

Die Frist für öffentliche Stellungnahmen zu diesem Vorschlag endete am 9. April 2019.

On February 20, 2019, SASO issued a notice to certification bodies regarding the update of implementation plans for 1) Washing Machines and 2) Refrigerators/Freezers

The summary of the updates are as follows:

On March 21, 2019, the Communication and Information Technology Commission (CITC) issued a notice regarding the latest requirements for Universal Mobile Telecommunication System (UMTS) and LTE handsets and ancillary equipment that are intended for importation into Saudi Arabia.

The notice states that all equipment falling within the scope of CITC technical specification RI056, namely UMTS and LTE handsets and related terminal equipment, are required to at least support 4G and contain an CITC E-label to receive approval from CITC and enter into Saudi Arabia. The CITC has also cancelled all prior approved certificates for devices that fall within the scope of technical specification RI056 but do not support 4G.

On April 2, 2019, the Saudi Standards, Metrology and Quality Organization (SASO) announced that until the end of this year, they are accepting Energy Efficiency Certificate and Labelling (EER) registration of lighting products that have not completed the 2000 hours survival factor and lumen maintenance test.

SASO requires lighting products to comply with the EER requirement for entering Saudi Arabia. To obtain the EER certificate, reports for survival factor and lumen maintenance test of at least 2000 hours are required. In a notice dated April 2, 2019, SASO agreed to accept EER registration for lighting products that have not obtained the aforementioned reports, given the following conditions:

• For lamp products:

  • Provide document from manufacturer agreeing to perform the test and submit the test report to SASO within 15 days of the completion of the test.

  • Provide document from SASO accredited third party laboratory confirming receipt of samples and indicating start and end date of test.

• For luminaries products:

  • Provide document from manufacturer agreeing to perform the test and submit the test report to SASO within 15 days of the completion of the test.

  • Provide document from SASO accredited third party laboratory confirming receipt of samples and indicating start and end date of test if testing is performed by a SASO accredited third party laboratory.

  • Provide contract with third party for performing witness tests clarifying the start and end dates of the test if testing is performed by a SASO accredited manufacturer’s laboratory.

SASO may take legal procedures if manufacturer or supplier fails to submit test report within 30 days of the completion of the test.